ComAp InteliGen - Description of Intelisys NT MEASUREMENT Screens

Measurement IO
IG-CU analog inputs
AI1 to AI3
IG-CU analog inputs
AI1 to AI3
+ inputs/outputs of connected ECU and/or modules, depending on actual
configuration.
Description of InteliSys
NT
MEASUREMENT screens
Main menu screen
1. Selection of alarm list, measurement, history, setpoints, languages or user
screen.
2. Cursor shows actual selection.
3. Controller mode indication. Black background indicates active mode (MAN
mode in the above example).
4. Timer – events counting time (e.g. prestart, cooling).
5. Engine machine state indication.
6. Electric machine state indication.
7. Actual gen-set power (requested gen-set power).
8. Actual RPM.
9. Indication of access level from the controller panel:
Closed
lock
No password set
Opened
lock
Password is set. Password level is visible in
opened lock.
10. Controller date and time. Can be set in Date/Time group of setpoints.
2
1
3
4
5
6
7
8
9
10
InteliVision 5, InteliVision 8 – Operator guide, ©ComAp – January 2014
IGS-NT Operator Guide 01-2014.pdf
47