ComAp InteliGen - Page 46

P mains
Q mains
Mains PF
MaxVectorS
Gen-set power
Active power (total and per
phase)
Power factor (total and per
phase)
Reactive power kVAr (total and per
phase)
Apparent power (total and per phase)
Gen-set power
Active power (total and per phase)
Power factor (total and per phase)
Reactive power kVAr (total and per phase)
Apparent power (total and per phase)
IG-CU Analog inputs
Battery voltage (single
barograph)
CPU temp (single
barograph)
Dplus (single
barograph)
IG-CU Analog inputs
Battery voltage (single
barograph)
CPU temp (single barograph)
Dplus (single barograph)
Synchroscope
Slip frequency
Synchroscope
V1g Generator first phase voltage
V1b Bus first phase voltage
SRO Speed regulator output indication in
the range 0 to ±10,00V
VRO Voltage regulator output indication
in the range 0 to 100%.
Synchroscope
Slip frequency
Synchroscope
V1g Generator first phase voltage
V1m Mains first phase voltage
SRO Speed regulator output indication in
the range 0 to ±10,00V
VRO Voltage regulator output indication in
the range 0 to 100%.
Statistic
Run hours
Number of starts
Number of unsuccessful starts
Service time 1
Service time 2
Service time 3
Service time 4
Statistic
Run hours
Number of starts
Number of unsuccessful starts
Service time 1
Service time 2
Service time 3
Service time 4
Statistic
kWhours
kVArhours
Time
Date
Statistic
kWhours
kVArhours
Time
Date
Power management
Engine priority
Total running actual power
Actual reserve (single barograph)
CAN16
CAN32
InteliVision 5, InteliVision 8 – Operator guide, ©ComAp – January 2014
IGS-NT Operator Guide 01-2014.pdf
46