ComAp InteliGen - Page 52

If the temperatures of
cylinders are
configured/measured it is
possible to see bargraphs of
these temperatures on the
separate screen.
Another screen shows the
differences of cylinder
temperatures from the
average temperature.
Further screens are automatically added if I/O extension modules or ECU are
connected to the controller.
History
1. Bottom lines show record
number, reason, date and
time even if other columns
are actually displayed
1
InteliVision 5, InteliVision 8 – Operator guide, ©ComAp – January 2014
IGS-NT Operator Guide 01-2014.pdf
52