ComAp IS-NT-BB

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
197
Description
This input is used to disable temporarily the output from the Timer channel #3.
NOTE:
See also the setpoint TimerChannel 3 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 4
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #4.
NOTE:
See also the setpoint TimerChannel 4 and output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 5
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #5.
NOTE:
See also the setpoint TimerChannel 5 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 6
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #6.
NOTE:
See also the setpoint TimerChannel 6 and output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 7
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #7.
NOTE:
See also the setpoint TimerChannel 7 and output TimerAct 5-8.
NOTE: