IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
according to the list displayed in GenConfig in the Force value window at the related
setpoint).
NOTE:
Watch a training video about force value function here:
http://www.comap.cz/support/training/training-videos/.
EXAMPLE OF AN ACTIVE FORCE VALUE BLOCK
EXAMPLE OF AN INACTIVE FORCE VALUE BLOCK
Binary input: ForceValueIn 2
This input activates the Force value #2 block. If the input is active, the value of the
setpoint, to which the Force value #2 block is configured, will be overriden by
To Next Page
Loading...
Need help?
General
