ComAp IS-NTC-BB

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
84
3. GtoM AngleReq
4. Dwell time
5. Freq gain
6. Freq int
7. Freq reg loop
8. Angle gain
9. Speed gov bias
10. SpdGovPWM rate
11. SpeedGovLowLim
12. SpeedGovHiLim
13. TauSpeedActuat
14. Load ramp
15. Load gain
16. Load int
17. RampStartLevel
18. GCB open level
19. GCB open del
20. Sync timeout
21. LS gain
22. LS int
Setpoints - Timer settings
1. TimerChannel 1
2. TimerChannel 2
3. TimerChannel 3
4. TimerChannel 4
5. TimerChannel 5
6. TimerChannel 6
7. TimerChannel 7
8. TimerChannel 8
9. TimerChannel 9
10. TimerChannel 10
11. TimerChannel 11
12. TimerChannel 12
13. TimerChannel 13
14. TimerChannel 14
15. TimerChannel 15
16. TimerChannel 16
Setpoints - Volt/PF Control
1. AVRRegChar
2. Voltage gain
3. Voltage int
4. PF gain
5. PF int
6. AVR DCout bias
7. VS gain
8. VS int
9. TauVoltActuat