ComAp IS-NTC-BB

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
213
is available in the combined output TimerAct 1-4.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 5
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #5. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 6
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #6. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 7
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #7. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 8
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #8. Output from this channel
is available in the combined output TimerAct 5-8.
NOTE:
See the chapter Timers for more details about timers.