ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
214
Setpoint: Timer channel 9
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #9. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 10
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #10. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 11
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #11. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 12
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #12. Output from this channel
is available in the combined output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English