ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
215
Setpoint: Timer channel 13
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #13. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 14
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #14. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 15
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #15. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 16
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #16. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Group: Act. calls/SMS

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English