ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
307
Available in IS-NT only.
Analog input: Cyl temp 8
Related FW
3.0
Description
Logical analog input for cylinder temperature #8. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 9
Related FW
3.0
Description
Logical analog input for cylinder temperature #9. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 10
Related FW
3.0
Description
Logical analog input for cylinder temperature #10. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 11
Related FW
3.0
Description
Logical analog input for cylinder temperature #11. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 12
Related FW
3.0
Description
Logical analog input for cylinder temperature #12. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 13
Related FW
3.0

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English