ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
310
Available in IS-NT only.
Analog input: Cyl temp 25
Related FW
3.0
Description
Logical analog input for cylinder temperature #25. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 26
Related FW
3.0
Description
Logical analog input for cylinder temperature #26. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 27
Related FW
3.0
Description
Logical analog input for cylinder temperature #27. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 28
Related FW
3.0
Description
Logical analog input for cylinder temperature #28. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 29
Related FW
3.0
Description
Logical analog input for cylinder temperature #29. Used for computing of values T
Cyl aver, T Cyl max, T Cyl min.
NOTE:
Available in IS-NT only.
Analog input: Cyl temp 30
Related FW
3.0

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English