Attendant Features GCA70-245
96 Comdial August, 03
8.2 System Telephone Naming
This feature lets you and other system user’s with LCD speaker-
phones know who is calling. You can assign either a personal name or
a group name to each system telephone. This name can contain up to
seven letters and will show up in the user’s display and/or in the
called party’s display. Typical names could be SRVC, MKTG 1, and
K SMITH.
When appropriate programming action has been taken by the
installer, the display shows a second line that details the personal
intercom number of the calling station.
• Name the system telephones as follows:
1. USE letter code table on page 95 to compose names for all telephones
requiring them (the system accepts up to seven letters per name).
2. PRESS INTERCOM.
3. DIAL *#06.
4. DIAL the station number of the telephone to be named.
5. DIAL # to clear current entry.
6. DIAL two-digit codes that correspond to letters in name, for example:
7. DIAL * to continue entering station names (repeat above steps
beginning with station selection.
8. PRESS SPEAKER to end.
9. RECORD names on page 97.
Dialing Codes for “J Smith”
J S m i t h
51 12 73 64 46 84 45
To Next Page
Loading...
