Comdial SCS 8324F - LCD Message Delivery

Nonverbal Messaging GCA70-245
54 Comdial August, 03
5.3 LCD Message Delivery
You can set standard and system supplied custom display messages
by dialing a specific code at your telephone. When another user
places a call from an LCD speakerphone, the preset LCD message
from your station will flash on the caller’s LCD. When you set a
message, the intercom light at your telephone flashes to indicate that
the feature is active.
• To turn message on,
1. PRESS INTERCOM.
2. DIAL *02.
3. DIAL the desired number from your message list. The default mes-
sages of “Back At” and “Call” may be used:
• For default message 1, which is “Back At,” dial time in twelve-hour
format using the # as a colon.
• For default message 2, which is “Call,” dial the telephone number of
where you will be.
4. PRESS SPEAKER to end message. Intercom light flashes steadily.
• To turn off message and your intercom light,
1. PRESS INTERCOM.
2. DIAL #02.