Making Calls GCA70-245
30 Comdial August, 03
3.2 Making Intercom Calls
There are two methods for making an intercom call. One causes the
called telephone to ring (tone-first). The other causes your voice to
sound out at the called telephone (voice-first). Your installer can set
the system to deliver either tone-first or voice-first calling.
• To manually cause the other
telephone to ring (tone
calling),
1. PRESS INTERCOM.
2. DIAL extension number (called tele-
phone will ring).
• To tone call automatically,
—PRESS DSS/BLF button (called telephone will ring).
• To voice announce manually,
1. PRESS INTERCOM.
2. DIAL extension number.
3. SPEAK your announcement.
• To voice announce automatically,
1. PRESS DSS/BLF button.
2. SPEAK your announcement.
NOTE: The following instructions assume a tone-first setting. You
can change a call to voice announce signaling for that call simply
by pressing the INTERCOM button again after dialing the exten
-
sion number or by pressing the DSS/BLF button again.
NOTE: The following instructions assume a voice-first default
setting. Any user can change a call to a tone signaling for that
call simply by pressing the INTERCOM button again after dialing
the extension number or by pressing the DSS/BLF button again.
To Next Page
Loading...
