DSUII Attendant User’s Guide
August, 03 Comdial 13
Next to a fixed feature or programmable feature button:
• Steady red = the feature is on.
• Steady off = the feature is off.
Above the MUTE button:
• On steady = called party cannot hear your conversation.
Next to INTERCOM button:
• Steady red with a quick flash = you are using your intercom.
• Winking red = an LCD message is set on your telephone for
others to receive when calling.
• Flashing red = someone is calling your extension
• Fluttering red = auto-redial is in use or system is in night mode.
Above the HOLD button:
• Flashing red (non-SCS Models only) = message awaits pick up.
• Fluttering red = automatic station relocation has been set.
Next to the MESSAGE button (SCS models only)
• Flashing red = message awaits pick up.
Above the SPEAKER button:
• On steady (with the telephone on hook and busy) =
speakerphone mode is active.
• On steady (with telephone on hook and idle) = background
music is turned on.
NOTE: You can find the programmable buttons that the installer
designates feature buttons through user programming in the
same location as the DSS/BLF buttons. Ensure that these buttons
are labeled correctly to indicate their unique features.
To Next Page
Loading...
