DSUII Attendant User’s Guide
August, 03 Comdial 79
• To send a call back message to someone’s Tracker
Pager after receiving a ring no answer,
1. MAKE an intercom call to someone and receive no answer.
2. PRESS programmed TRACK button OR DIAL #01.
3. After your station returns to idle* hang up handset or press SPEAKER
to end. The Tracker Pager system will transmit your station extension
number to called party’s Tracker Pager display. (Some models will
also display your station name if the system is programmed to include
station names.)
* If the Tracker paging system does not accept your actions, an error
tone sounds at your telephone.
• To send a call back message to someone’s Tracker
Pager without first calling them,
1. PRESS INTERCOM.
2. DIAL #01.
3. DIAL station extension number.
4. HANG UP handset OR PRESS SPEAKER to end. The Tracker Pager
system will transmit your station extension number to the caller’s
Tracker Pager display. (Some models will also display your station
name if the system is programmed to include station names.)
To Next Page
Loading...
