Comelit MT SB 01 - I4-Recording Speed Number

GROUP S.p.A.
MT SB 01 36
E N
- press the MENU key and use the keys to view
the 3-DAY/NIGHT AUTOMATIC menu, then press 3;
3-DAY/NIGHT
AUTOMATIC
- use the key to view the 3-WEEK PROGRAM
menu, then press 3;
3-WEEK
PROGRAM
- press to select one of the 3 operating modes
(MODES: AUTO- DAY- NIGHT)
MONDAY
MODE: AUTO
MONDAY
MODE: DAY
MONDAY
MODE: NIGHT
- to conrm and move on to the next day, press OK
and repeat the procedure for all days of the week;
- press OK to conrm;
- press ESC repeatedly to return to the main screen.
CAUTION! The days programmed to operate in
AUTO mode will all have the same time bands
- press the MENU key and use the keys to view
the 3-DAY/NIGHT AUTOMATIC menu, then press 3;
3-DAY/NIGHT
AUTOMATIC
- press the 2-SET TIME key;
1-ON/OFF
2-SET TIMES
- 00:00 is the default time, the cursor will be positioned
on the rst digit. Enter the time using the alphanumeric
keypad, moving the cursor using the keys ;
TIME 1:
00:00
- to conrm and move on to the next time, press OK
and repeat the procedure for all 4 times;
TIME 2:
00:00
- press ESC repeatedly to return to the main screen.
I3.2 - Set times in auto mode
Speed numbers can be used to call an internal
extension directly by pressing the key associated
with the user address.
To store a speed number in the memory:
- press the MENU key and use the keys to view
the 4-RECORDING SPEED NUMBER menu, then
press 4;
4-RECORDING
SPEED NUMBER
- enter the code using the alphanumeric keypad
(default code 000):
SPEED NUMBER 01
CODE: 000
NOTE: the CODE arrangement will be as follows:
- CODE (max. 3 digits): 000 for the Simplebus system
- CODE (max. 3+3 digits): --- --- for the Simplebus
TOP system
- CODE (max. 6 digits): ------ for the Simplebus and
Simplebus TOP system with INDIRECT CODE
- To move on to the next speed number, press OK
and repeat the procedure;
- press ESC to return to the main screen.
I4 - Recording speed number
I3.3 - Weekly programming
set as listed in the section “I3.2 SET TIMES IN
AUTO MODE”, page 36.