To Next PageTo Next Page
Need help?Do you have a question about the Comelit UT2020 and is the answer not in the manual?
General| Type | Video Door Phone |
|---|---|
| Camera | Yes |
| Night Vision | Yes |
| Connectivity | 2-wire |
| Wiring system | 2-wire |
Defines the product's purpose and application in residential, commercial, and public buildings.
Outlines requirements for installation by qualified technical personnel to high standards.
Provides guidance on disconnecting power, using suitable wires, and avoiding shared ducts with power cables.
Emphasizes observing manual instructions and ensuring system integrity for safe product operation.
Details requirements for routine cleaning and specifies that repairs must be done by authorized personnel.
States Comelit S.p.A. is not responsible for misuse or failure to follow instructions.
Declares equipment conformity to directives and explains WEEE symbol for proper disposal.
Details the UT2020 module for Ultra entrance panels, including camera specs and features.
Describes the UT2010VC module for analogue remote cameras, highlighting its features and dimensions.
Illustrates the basic wiring diagram for connecting the system components.
Provides wiring instructions for systems requiring an external power supply unit.
Shows wiring diagrams for specific system variants, including relay and safety door lock setups.
Details the wiring for the UT9270 module when using an additional power supply.
Guides on setting the button type (single/dual) using DIP switch configuration.
Explains how to assign addresses to modules for easier replacement and reprogramming.
Outlines methods for programming user codes, either consecutively or specifically.
Details how the twilight sensor controls camera and button LED lighting modes (AUTO, ON, OFF).
Explains how the Light-me function interacts with different button backlighting modes.
