26
Press the arrow keys group to select the five options settings of “Register, Lead Options, Filter Options, Print
Options and System Options”. Press the arrow keys group to set a submenu.
(1) Input the Characters
Input the patient information on the “Register” setting interface:
Character Input Interface
Inputting Method:
Press MENU key to Patient Information Setting item
Press the up and dawn arrow key to move the cursor to “Name” menu, then press the left and right key of
the combination keys to the editing window.
Press the corresponding arrow group keys, then press START/STOP key to confirm the selection. To
delete the input information, press the RECALL key.
In the editing window, press MODE to switch big or small letters.
Press MENU key to back to the upper menu
Edit the hospital, doctor, parameters or other items in the setting window of the “Register”
setting menu, the parameters setting and characters input are same as described above.
For age, height, weight, blood pressure setting, press the figure keyboards to set up.
Note: In the recording process, the patient information can not be modified.
(1) NAME: Patient’s Name (Letters: not more than 20 characters; English: not more than 10 letters)
(2) SEX: Sex of the Patient (Male/Female)
(3) AGE: Patient’s Age (Range: 0~99)
(4) HEIGHT (cm): Patient’s Height (Range: 0~999)
(5) WEIGHT (kg): Patient’s Body Weight (Rand: 0~999)
(6) SYS (mmHg): Patient’s Systolic Pressure
(7) DIA (mmHg): Patient’s Diastolic Pressure
To Next Page
