COMGROW COMGO Z1 - Frame Assembly Pt.3; Frame Assembly Pt.4

0809
Ready:
M5X8 Screw(2Pcs)
Ready:
Support Feet
(4Pcs)
X-axis assembly
STEP3.Use 2 M5*8 screws to fix the motherboard cover to the front
of the gantry.
STEP4.Take out the 4 support feet and install them using 8 M5*8
screws and 4 M5 T-nuts.
Frame Assembly Pt.3 Frame Assembly Pt.4
M5X8 Screw(8Pcs)
M5 T-Nut(4Pcs)