Connecting
the
1084
to
a
Power
Source
After you have connected your monitor to your computer, you need
to connect the monitor to
an
electrical source. Your monitor is
equipped with a 3-pronged, 120-volt
AC
line plug. If you are not
sure of the type of power supply to your home, consult your dealer
or local power company. If it is necessary to use a 2-prong plug
adapter, make sure the adapter
is
properly grounded according to
its instructions.
Do
not use more than one plug adapter
on
one
power outlet.
10
To Next Page
Loading...
