Commodore 1541-II - Page 49

One use for Initialize is to keep a cleaning diskette spinning, if you choose to use
one. (There is no need to use such kits on any regular basis under normal conditions of
cleanliness and care.) Nonetheless, if you are using such a kit, the following short
program will keep the diskette spinning long enough for your need:
10 OPEN 15,8,15
20 FOR 1=1 TO 99
30:PRINT#15,"I0"
40 NEXT
50 CLOSE 15
It uses an Initialize loop to keep the drive motor on for about 20 seconds.
41