16. On the Managed Devices tab, choose Allow All to allow all devices to access the Data
Gateway. Then you can add devices that you want to block to the blocked list.
Important: The Block All opon will block access to the Data Gateway for all
devices, including the device that is currently connected to the Data Gateway. We
recommend that you do not choose this opon because it may cause a loss of
connecvity.
17. Click +Add Blocked Device to add a device to the blocked list.
18. Enter the name of the device and its MAC address, and specify when you want to block
it.
19. Click Save.
Chapter 2: Get started
Touchstone DG6450 Data Gateway User Guide DRAFT Revision 2.5 23
To Next Page
Loading...
