10
7950 V2 Pager User Guide for 7950 V2
Pager Alarm
Your pager has an alarm that can be set for a specific time and date, or a specific time on a daily basis. At the
selected alarm time, your pager alerts. If the alarm passes without being acknowledged,
flashes until any button
is pressed.
Set a One-Time Alarm
1. From the Function menu, press
to move the cursor to .
2. Press
. The Set-time-alarm screen display.
3. Press
. The Set-alarm screen displays.
Example of Set-Alarm screen for a specific time and date:
The alarm symbol shows the current alarm status.
is displayed if the alarm is enabled, is displayed
if the alarm is disabled.
4. Press
to move the cursor to the alarm symbol.
5. Press
until is displayed.
6. Press
to move the cursor to the hour digits.
7. Press
.
8. Adjust the hour digits.
9. Adjust the minutes, AM/PM/24, hour, and date.
10. Press to activate the alarm. The symbol displays on the Standby screen.
Set the Alarm to Alert Daily
1. Follow the steps in the previous section to set the alarm time.
2. When setting the date, press
until you see double dashes for the month, day, and year (--/--/--).
Example of Set-Alarm screen for a daily alert:
3. Press
to activate the alarm. The alarm is now set to alarm every day at the specified time. is displayed
on the Standby screen.
To Next Page
Loading...
