commtech wireless 7950 V2 - Private Time Mode Settings; Using the Pager Notebook

User Guide for 7950 V2 7950 V2 Pager
 11
Private Time
You can choose a time period during which your pager is completely silent. Your pager still receives messages but it
does not alert. The pager alerts only if an alarm expires or a priority message is received.
Set Private Time
1. From the Function menu, press to move the cursor to .
2. Press
.
When the Private-time screen is first displayed, the cursor is at the flashing symbol on the far left.
indicates private time is enabled and  indicates private time is disabled.
Example of Set Private-Time screen:
3. Press
until is displayed.
4. Press
to move the cursor to the hour digit.
5. Press
to adjust the hour digit.
6. Adjust the on and off time setting.
7. Press
to activate you selection.
The symbol
is displayed in the Standby screen when private time is enabled.
NOTE: If the on time is equal to the off time, private time is not enabled.
Disable Private Time
1. Press .
2. Press
to move the cursor to .
3. Press
.
4. Press and release until  is displayed.
5. Press
to disable private time.
Notebook
Your pager has a personal notebook for storing personal messages. Notebook messages are indicated by .
Personal messages are indicated on the first row of the display.
Example Notebook locations: