INS_CNGE2+2SMS_REV– 02/19/13 PAGE 44
INSTALLATION AND OPERATION MANUAL CNGE2+2SMS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Static MAC Lock Configuration
Static MAC Lock Configuration interface
Label Description
Enable Enable static MAC locking
MAC Addr. MAC address of the device that is allowed to forward and receive traffic.
Packets will be dropped for MAC addresses not listed in the table
Port Number Ports to be included in the locked list
Apply Select Apply to activate the configurations.
Help Show help file.
Important Note: RSTP cannot be used in conjunction with the Static MAC Lock feature.
A system reset must be performed after making changes to the static MAC lock
settings.
To Next Page
Loading...
