Compaq Presario 3500 Series - Hood Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal &
Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Hood
Disassembly Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1.Perform the
preparation
for
disassembly
procedures.
2.Remove
three
screws from
the back of
the
computer.
3.Pull the
hood
backwards
until it is
completely
detached.
End of
sequence.
Replacement
To replace
the hood,
reverse the
removal
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/remhood.html [12/9/2002 4:35:51 PM]