Compaq Presario 3500 Series - Riser Board Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Riser Board
Disassembly
Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1. Perform the
preparation
for
disassembly
procedures.
2.
Remove the
hood.
3.
Remove the
fax/modem.
4.
Remove one
screw from
the riser
board
bracket.
5.
Pull the riser
board out of
the slot.
6.
Remove the
riser board
mounting
bracket. End
of sequence.
Replacement
To replace the
riser board,
reverse the
removal
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/riser.html [12/9/2002 4:35:59 PM]