Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Memory Module
Disassembly
Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1. Perform the
preparation for disassembly
procedure.
2. Remove the hood.
3. Press outward on the release latches
found on both ends of the dual inline
memory module (DIMM).
4. Detach memory module from the slot.
End of sequence.
Replacement
To replace the memory module, reverse
the removal procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/memory.html [12/9/2002 4:36:01 PM]
To Next Page
Loading...
