Compaq Presario 3500 Series - Button Board Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal &
Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Button Board
Disassembly
Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1.
Perform the
preparation for
disassembly
procedures.
2.
Remove the hood.
3.
Remove the front
bezel.
4.
Remove two screws
from the button
board.
End of sequence.
Replacement
To replace the button
board, reverse the
removal procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/button.html [12/9/2002 4:36:20 PM]