Compaq Presario 3500 Series - System Board Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal &
Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
System Board
Dissasembly Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1.
Perform the
preparation
for
disassembly
procedures.
2.
Remove the
hood.
3.
Remove the
fax/modem.
4.
Remove the
riser board.
5.
Remove the
power
supply.
6.
Remove the
diskette
drive.
7.
Remove the
CD drive.
8.
Remove
three
screws from
the CD
drive
mounting
bracket and
slide it
backwards
to detach.
Go to Step 9.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/rmsysbd.html [12/9/2002 4:36:15 PM]