Compaq Presario 3500 Series - Processor Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts
|
Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Processor
Disassembly Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1.
Perform the preparation for
disassembly procedures.
2.
Remove the hood.
3.
Remove the processor fan.
4. Pull the socket arm to the
vertical position.
5. Lift the processor out of the
socket.
End of sequence.
Replacement
To replace the processor,
reverse the removal
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/procssr.html [12/9/2002 4:36:05 PM]