Compaq Presario 3500 Series - Front Bezel Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal &
Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Front Bezel
Disassembly
Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1.
Perform the
preparation for
disassembly procedures.
2.
Remove the hood.
3.
Disengage the six clips on the front
bezel following this order: 1 upper
three clips, 2 lower right two clips,
3 lower left clip.
Go to Step 4.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/frntbzl.html [12/9/2002 4:36:17 PM]