Compaq Presario 3500 Series - I;O Board Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal &
Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
I/O Board
Disassembly
Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1.
Perform the
preparation for
disassembly
procedures.
2.
Remove the hood.
3.
Remove the front
bezel.
4.
Remove two screws
from the I/O Board
mounting bracket.
5.
Remove the I/O
Board mounting
bracket.
End of sequence.
Replacement
To replace the I/O
board, reverse the
removal procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/creatctr.html [12/9/2002 4:36:22 PM]