Compaq Presario 3500 Series - Fax;Modem Removal

Compaq.com - Compaq Presario Maintenance and Service Guide - 3500 Series
United States December 9, 2002
Maintenance & Service Guide
Presario 3500 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Fax/Modem
Disassembly
Sequence
Hood
Mass Storage Devices
Fax/Modem
Riser Board
Memory
Processor Fan
Processor
RTC Battery
Power Supply
System Board
Connectors
System Board
Front Bezel
Button Board
I/O Board
Removal
1. Perform the
preparation
for
disassembly
procedures.
2.
Remove the
hood.
3.
Remove one
screw from
the
fax/modem
bracket.
4.
Pull the
fax/modem
out of the
slot.
End of
sequence.
Replacement
To replace the
fax/modem,
reverse the
removal
procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/3550/fxmdm.html [12/9/2002 4:35:56 PM]