3.2 Setting the current day and time
Press the “SET” button to go to the main screen, then press the
“DAY” button. At this time only the rst three letters of the current day
will ash on the display of the thermostat and the hour and minute
values can be seen.
Using the large and buttons on the front panel of
the device, set the current day (Monday: MON; Tuesday: TUE;
Wednesday: WED, etc.). Press the “DAY” button again. At this time
the abbreviation indicating the day stops ashing and becomes
visible continuously while the numbers indicating the hour will ash
on the display. Using the large and buttons on the front
panel of the device, set the hour value of the current time. Press the
“DAY” button again. At this time the numbers that indicate the hour
stop ashing and become visible continuously, while the numbers
indicating the minute will begin ashing. Using the large and
11
To Next Page
Loading...
