4.3 Programming steps
a. Press the “SET” button to go to the main screen.
b. Press the “SET” button again and hold it down and press the
“PROG” button, too. At this point the device gets into programming
mode and the abbreviations indicating the days of the week (MON
TUE WED THU FRI SAT SUN) are ashing on the display.
c. Select the day to be programmed using the large and
buttons on the front panel of the device (MON indicating
Monday, TUE indicating Tuesday etc.). If you wish to create
the same program for each day of the week, it is reasonable
to choose all days of the week simultaneously (by selecting
MON TUE WED THU FRI SAT SUN together), this way there
is no need to perform separate programming of the days. After
selecting the desired day(s), press the “PROG” button.
25
To Next Page
Loading...
