4. PROGRAMMING THE THERMOSTAT
4.1 A brief introduction to programming
• Programming means the setting of switching times and selection of
accompanying temperature levels. The device can be programmed
for a one-week period. Its operation is automatic, and it will cyclically
repeat the programs that have been keyed in. For each day, beside 1
xed (PROG ) switching time, 6 adjustable (PROG – PROG ) switch-
ing times can be set. For all switching times a different temperature
can be assigned between 5 and 35°C, in 0.5°C increments. The
temperature set for a given switch will remain valid until the start
time of the next switch. Accordingly, the thermostat will keep the
temperature set for switching time PROG until switching time PROG
is reached. After switching time PROG the temperature selected to
switch PROG will be valid until the time of the next switch (PROG ).
18
To Next Page
Loading...
