Computherm Q7 - A Brief Description of Programming

A BRIEF DESCRIPTION OF PROGRAMMING
• Setting the date and time: press the “DAY” button, then adjust values using the
“DAY”, and buttons.
• Programming: press and hold down the “SET” button, while pressing the “PROG”
button too, then adjust values with the “PROG”, and buttons; use
the “COPY” button to copy repeated programmes.
• Program inspection: using the “PROG”, and buttons.
• Temporary modication of the temperature set in the program:
• until the next switch in the program: set the temperature using the
and buttons.
• for a period of 1 to 9 hours: set the temperature using the and
buttons, then press the “DAY” button, and nally set the duration using the
and buttons.
• for a period of 1 to 99 days: set the temperature using the and
buttons, then press the “HOLD” button and hold it down for 2
seconds, and nally set the duration using the and buttons.
• until the next interference: set the temperature using the and
buttons, then press the “HOLD” button briey.