Computherm Q7 - Override Until Next Switch

• To set the comfort temperature, press the “SET” button and
keep it depressed and press the button, too. Following
this, with the help of the and buttons, set the
comfort temperature selected by you. After the temperature has
been set, press the “SET” button to save the modication (after
approximately 15 seconds, it is automatically saved). Afterwards,
the device goes back to the main screen.
5.1 Temperature modication until the next program switch
Set the required temperature using the large and
buttons on the front panel of the device. At this time, the icon
appears on the display, indicating that the thermostat is operated
with manual control. The device will control the boiler according to
the set value until the time of the next switch specied in the program
is reached.
36