onds. After this, the modication can be continued by selecting
another day. When nished with all the modications, press the
“SET” button to save them. After approximately 1 minute, they
are automatically saved. Afterwards, the device goes back to the
main screen.
• If a completely different program is needed, then press the
“RESET” button located on the main panel of the thermostat
to reset the device (it deletes both the program and the basic
settings). Following this, adjust the basic settings of the
thermostat again and create the new program, as described in
Sections 3 and 4.
32
To Next Page
Loading...
