4
O p e r a t i o n
C o n t r o l Fun c ti o n D es c ri p ti o ns -
S t a n d Al o ne Co n f i g u r a t i o n ( c on t in u e d )
Alarms
When an alarm occurs, an audible
sound will be triggered and the
operator interface will display a
flashing alarm message.
To view an alarm from any opera-
tor screen, press the Alarm button.
1 Press the Alarms button.
2 View the current alarms.
3 Decide if you want to Acknowledge Alarms, Silence and Acknowledge Alarms,
Reset All Alarms or clear individual alarms.
The following buttons are available from the Alarms log screen:
Previous - The previous button is used to select the previous alarm when
multiple alarms are displayed.
Next - The next button is used to select the next alarm when multiple alarms
are displayed.
Alarm History- Pressing the Alarm
History button will show a detailed
listof the alarm history.
Acknowledge All - The acknowledge all
button is used to acknowledge all the
alarms on the list.
Reset All Alarms - The Reset button is used to clear all alarms on the list. If the
condition has not been remedied, the alarm will reappear.
O p e r a ti o n l 4 - 7 9