4
O p e r a t i o n
O p e r a ti o n l 4 - 9 5
Web S er v er Set u p Scr e en
Administrative security level (level 6) is required to access this screen. The Current User
Name and Password will be shown on this screen in the “Current:” section. Any new User
Name and Passwords that are entered will be shown in the “NEW:” section. On every
power cycle or reset of the HMI, the New settings boxes will be set to match the current
settings. The allowable length of the User Name or Password is 16 characters. That
includes spaces, numbers, and
special characters. If more than
16 characters are entered into the
“NEW:” fields, once the changes
are applied, the string will be
reduced to the first 16 characters
entered.
When the “Apply NEW Web
Server Access Settings Now” but-
ton is pressed, a confirmation
popup will appear. The user can
then apply the changes with the
Apply button or cancel with the X
button and go back to the setup
screen.
NOTE: Proper login is required to
change these settings.
✐
NOTE: Remember that both the user
name and password are case sensi-
tive, and limited to 16 characters.
✐
To Next Page
Loading...
Need help?
General
