4 - 8 2 l Op e ra ti o n
D C - T Sys t em Se c u r i t y Lev e ls
There are five (5) customer security levels within the DC-T control. The DC-T is shipped
with the password security level set at guest.
To log in at a different user level:
1 Press the Security/Login button from the Home screen.
A Log-in screen pop up window will appear.
2 Press the green arrow. A pop up window
will appear with a keypad.
3 Using the keypad, enter your
username. Finish by pressing
the green enter arrow.
4 Using the keypad, enter your
password. Finish by pressing
the green enter arrow.
The green key at the bottom of the
home page will have a number in
it, representing your current secu-
rity level. Pressing the Login but-
ton again will log the user out of
the system. Also, innactivity for 10 minutes will log you out of the control. The control
will return to security level guest.
Basic user level information:
NOTE: Proper login may be
required to view certain
screens or make changes to
various setttings. Conair rec-
ommends that the administra-
tor logs in first and changes
the admin password.
✐
User Real name Password Change password Security Level
oper1 Oper1 oper1 No 0, 1
oper2 Oper2 oper2 Yes 0, 1
oper3 Oper3 oper3 Yes 0, 1, 2
maint1 Maint1 maint1 Yes 0, 1, 2, 3
maint2 Maint2 maint2 Yes 0, 1, 2, 3, 4
maint3 Maint3 maint3 Yes 0, 1, 2, 3, 4, 5
admin Admin admin Yes 0, 1, 2, 3, 4, 5, 6
To Next Page
Loading...
Need help?
General
