UGH025-0504 Thermolator TW Series
TROUBLESHOOTING 6-33
Reattach the pump to
the volute.
Make sure you
replace any damaged gasket
or O-ring between the pump
assembly and volute case.
Check for free rotation after
assembly is completed.
9
NOTE: Before restarting, close all drain openings using
sealant on the threads and and refill the unit with fluid.
Do not start the the pump when the unit is dry.
DISASSEMBLING
AND
ASSEMBLING
3 - 7.5 HP PUMPS
CONTINUED
To Next Page
Loading...
