11
0712
allows you to select
meters, pace, watts or calories.
Pushthisbuttonanytimewhile
setting up a workout, skiing or
viewing results.
allows you to
chooseanotherdisplay.Push
this button any time while skiing.
Each time you press [CHANGE
DISPLAY] a new display is
shown. See below.
Turning the PM On/Off:
ThePMwillturnonwhenyou:
• starttopull
• press[MENU/BACK]
• insertaLogCardorUSBcable
• insertbatteriesorbatterypack
ThePMturnsoffafterfourminutesof
inactivity on a workout screen, or after
one minute on the Main Menu screen.
Setting Date and
Time:
The first time you turn on the
PM,youarepromptedtoset
the date and time. This ensures
your results are associated with
the proper date.
• Ifyoueverneedtore-set
Date/Time, from Main
Menu press More Options
> Utilities > Set Date
and Time.Usebuttons
as indicated to increase or
decrease time.
Note:HeartRate(HR)willbedisplayedonlyifHRInterfaceisinuse.
GETTING STARTED
OVERVIEW OF THE PERFORMANCE MONITOR(PM)
For more detailed information about using the Performance Monitor, please visit concept2.com/pm.
PM3
ThePM3willreceiveheartrate
transmissionfromaPolar™chestbelt
IF the optional Concept2 Heart Rate
Receiver(availablefromConcept2)is
inuseandpluggedintothePM3.
Not available.
PM4
ThePM4willreceiveheartrate
transmissionfromaPolar™chestbelt
IF the optional Concept2 Heart Rate
Receiver(availablefromConcept2)isin
useandpluggedintothePM4.
ThePM4willreceiveheartrate
transmissiondirectlyfromaSuunto™,
Garmin
®
or ANT+HR
™
chest belt.
See More Options for set up.
General Operation:
• ThePMautomaticallydisplaysyourworkoutdataassoonasyoustartskiing.Itis
not necessary to press any buttons if you do not want to.
• Press[MENU/BACK] to go back to the previous display.
• Press[CHANGE UNITS] or [CHANGE DISPLAY] at any time during and after
your ski to view different units and a different presentation of your workout data.
• Weencourageyoutoexplorethemenuandexperimentwiththebuttons!
Using a Heart Rate Monitor:
ThePMdisplaysyourheartrateifoneofthefollowingheartratesystems
is in use:
LogCard – when a LogCard is present, workout data will be stored
on the LogCard. After your workout, return to the Main Menu before
removingtheLogCardtoensureproperstorageofdata.(IfnoLogCard
present, data is stored in Memory.) Usethe“Concept2LogCard
Utility”tobackupyourLogCarddatatoyourPC.(USBcableprovided)
Note: ALogCardisprovidedwitheveryPerformanceMonitor(PM).
Each card can be shared by up to five users. Additional cards can be
purchased from Concept2.
These buttons allow you to:
• makemenuselections
• incrementnumbersforsettingworkoutsanddate/time
• viewalternatedisplayswhileskiing
turns on the monitor and displays Main Menu
or the previous menu. After a workout, press this button to
end the workout and return to the Main Menu.
Five Graphic Displays
ALL DATA FORCE CURVE PACESKIER BAR CHART LARGE PRINT