16
1210
MAINTENANCE
A Description of Cord Wear/Damage:
• Thecordsconsistofasolidbraid(notacoveringoverinnerbers).Overtimethesurfacewill
show “fuzzing.” If this “fuzzing” becomes worse in a localized spot on the cord it is time to
replace the cord. See photo at right.
• Thebungeecordconsistsofelasticbersencasedinabraidedcovering.Some“fuzzing”
of the covering is to be expected, but once the white fibers are exposed the cord should be
replaced immediately.
Inspect the Fasteners
Check that all fasteners are tight and have not loosened during use. If your SkiErg is wall mounted,
pay particular attention to the wall mount fasteners.
Inspect the Top Bracket Pulleys
Check that the pulleys spin freely in the housings and that the pulley housings swing freely in the
pulley brackets.
As needed
•Cleangripsandstrapsaftereachworkout.Useamildsoaporcleaningproduct.
•CleansurfacesoftheSkiErgwithanyhouseholdcleaner.DONOTsprayanyuidontothe
monitor.
•Dustandlintcancollectinsideoftheywheelenclosure.Thisbuildupcanrestrictairow
reducing the resistance of the fan. The outer cover of the fan enclosure can be removed for
cleaning by removing the four screws connecting the cover halves. See illustrations at right.
PulleyBracket
PulleyHousing
Pulley