16 Customer Service (800) 778-0990
Milk and the Milk System
Refrigeration Unit
The Integra features an on-board refrigeration unit to house
the milk used for drinks. The refrigeration unit is designed to
accommodate one standard, off-the-shelf one gallon/four liter
milk container.
The following types of milk can be used in the Integra:
• Whole
• 2%
• 1%
• Non-Fat
WARNING: Do NOT use any type of flavored milk in the milk
delivery system. The sugars in flavored milk (including eggnog)
can damage the machine and clog the milk delivery tubes.
Flavored milk can only be used on machines with the steam
wand option. For more information on the steam wand option,
please see page 21.
NOTE: For machines with the optional steam wand feature,
flavored milks can be heated using the steam wand.
Placing Milk in the Machine
1. Open the refrigeration unit door and partially place the
opened milk container in the refrigeration unit.
2. Place the milk pick-up tube in the milk container.
3. Slide the milk container into the refrigeration unit while
feeding the milk pick-up tube fully into the milk
container.
4. Close the refrigeration unit door.
DO make sure the milk pick-up tube is fed into the
middle of the container.
DO NOT place the milk pick-up tube into the milk container
handle.
DO NOT kink or bend the milk pick-up tube.
DO NOT pull excessively on the milk pick-up tube.
To Next Page
Loading...
