4 Customer Service (800) 778-0990
Using the Espresso System
Starting the System
The power switch is located on the panel behind the door for
the refrigeration unit.
1. To start the machine, press the power switch to the ON
position.
2. Close the door. The machine will not warm up if the door
is open.
3. The display will read:
CALIBRATING
WAIT WARMING UP
Machine warm-up takes approximately 20-30 minutes. During
warm-up, the machine is heating the water, generating steam,
and calibrating the brew group.
NOTE: During the machine warm-up process, it is normal for
hot water to be dispensed from the product outlet.
WARNING: Wait at least 10 seconds between turning the
machine off and back on again. Quickly flipping the power
switch on and off can blow a fuse within the machine and/or
result in machine malfunction.
Starting System if Display Reads: MACHINE IS OFF
If the power switch is on and the display reads MACHINE IS
OFF, you are unable to pour drinks. In this mode, only the
refrigeration unit is functioning.
To start the machine, press and hold the PROGRAM button. A
tone will sound; when the tone stops, release the PROGRAM
button.
To Next Page
Loading...
