2
measuring the SpO
2
more easily and accurately, our company developed the Fingertip Pulse
Oximeter. The device can measure the pulse rate simultaneously.
The Fingertip Pulse Oximeter is tiny, and with low power consumption, convenient to use and carry.
You just need to put the fingertip into the sensor of the device, the SpO
2
value will appear on the
screen immediately. In the clinical practice, the tolerance is smaller than ±2% in the range from 70%
to 100%.
2.1. Features
A. The device can accurately measure SpO
2
and pulse rate.
B. The device will power off automatically if no signal is detected within 5 seconds.
C. Lithium batteries is required for operating, and the continuous working time is 12 hours.
D. When Low-Voltage Warning is shown on screen, the device maybe not operate normally.
E. Light and portable, total weight with batteries is about 50g.
F. Classification: Class II a, （MDD93/42/EEC IX Rule 10）
G. With the function of USB transmission and wireless transmit.
H. It can store patient’s data and with alarm function.
2.2. Anticipative application
The Fingertip Pulse Oximeter can detect SpO
2
and pulse rate through patient’s finger, and indicate
the pulse intensity by the bar-display. This device is applicable for use in home, hospitals (surgery,
anesthesiology department, department of pediatrics, ordinary sickroom), oxygen bar, the
community medical treatment, physical care in sports (you can use the device before or after the
sport, but it is not recommended to use it during the sport) and so on.
This device is not appropriate for the ceaseless monitoring of the patients.
2.3. Environment requirements
Transport and storage
a）Temperature: -20°C~55°C
b）Humidity: ≤95%
c）Pressure: 500hPa~1060hPa
Operating
a）Temperature: 10°C ~40°C
b）Humidity: 35%~75%
c）Pressure: 700hPa~1060hPa
3. Principle and Caution
3.1. Principle of measurement
The measurement of pulse oximeter is that it uses a multi-functional oxyhemoglobinometer to
To Next Page
Loading...
Need help?
General
